The SHA M Bronze Series is a line of PC power supplies with a modular connector system, meeting all “80 PLUS Bronze” certification requirements: It reaches an efficiency of 85% at a 50% load, and an efficiency of 82% at a 20% and 100% load.
In addition to the 20+4 pin mainboard connector and the additional mainboard power supply (4+4 pin), both of which are firmly soldered to the circuit board of the power supply, the SHA Bronze power supplies offer a total of six connectors for the modular cable, through which the power supply can be equipped with a maximum of two PCIe (6 and 6+2 pin), six SATA and seven peripherals ports plus a floppy connect.
The use of those cables, which are really needed for the integrated hardware, optimize airflow within the case and contributes directly to a more effective cooling to heat sensitive hardware.
The SHA M Bronze Power Supplies offer two separate 12-Volt rails, which safely and reliably supply power to the connected components, and are cooled by a quiet 120 mm fan. They are available in 350, 450 and 550 Watts.
Features:
- ATX 12 V v.2.3:
Supports the latest Intel and AMD processor based systems.
- 80 plus Bronze:
This power supply unit complies with the requirements of the "80 PLUS bronze" certification, providing an efficiency of 85% under 50% load and 82% efficiency under 20% and 100% load.
- This PSU provides a modular cable system. Thus only the required cables need to be connected.
- Separate 12 V rails guarantee a stable power supply for all components.
- Active PFC function:
This power supply operates with active power factor correction (PFC).
- Temperature controlled 120 mm fan:
The installed 120 mm fan provides a considerably higher airflow with lower rpm, thus reducing the operating noise effectively.
- PCIe connectors:
This power supply unit is equipped with one 6-pin and one 6+2-pin PCIe connector.
- Dimensions: 150 x 140 x 86 mm (L x W x H)
Specifications:
| Input (AC) |
100 ~ 240 V / 60 ~ 50 Hz |
| Output (DC) |
+5 V |
+3.3 V |
+12 V1 |
12 V2 |
-12 V |
+5 VSB |
| Max. Output Current |
15 A |
14 A |
9 A |
9 A |
0.3 A |
2 A |
| Max. Combined Power |
130 W |
210 W |
13 W |
| 337 W |
| Total Power |
350 W |
| Input (AC) |
100 ~ 240 V / 60 ~ 50 Hz |
| Output (DC) |
+5 V |
+3.3 V |
+12 V1 |
12 V2 |
-12 V |
+5 VSB |
| Max. Output Current |
14 A |
13 A |
17 A |
18 A |
0.3 A |
2 A |
| Max. Combined Power |
110 W |
330 W |
13 W |
| 437 W |
| Total Power |
450 W |
| Input (AC) |
100 ~ 240 V / 60 ~ 50 Hz |
| Output (DC) |
+5 V |
+3.3 V |
+12 V1 |
12 V2 |
-12 V |
+5 VSB |
| Max. Output Current |
14 A |
14 A |
19 A |
20 A |
0.3 A |
2 A |
| Max. Combined Power |
116 W |
430 W |
13 W |
| 537 W |
| Total Power |
550 W |
Protective functions:
- Short circuit protection:
The power supply is designed with a short circuit protection to prevent damage of the power supply components. Main power will be shut down when a short circuit occurs. The PSU will return to normal after the short circuit has been removed and the main power switch has been turned off and back on again, with a minimum cycle pause of 2 seconds.
- Over voltage protection: The power supply provides a latch mode against over voltage, as defined below:
| |
Minimum |
Nominal |
Maximum |
Unit |
| +12 V |
13.4 |
15 |
15.6 |
V |
| +5 V |
5.74 |
6.3 |
7 |
V |
| +3.3 V |
3.76 |
4.2 |
4.3 |
V |
- Over power protection: The power supply will switch off, when the total output power exceeds 385 W (SHA350M), 495 W (SHA450M) or 605 W (SHA550M).
Connectors:
- 1x 20+4-pin ATX connector
- 1x 4+4-pin 12V/P8 connector
- 1x 6-pin PCIe connector
- 1x 6+2-pin PCIe connector
- 6x SATA connectors
- 7x 4-pin connectors for peripheral devices
- 1x 4-pin Floppy connector
Package contents:
- Power supply unit SHA350M Bronze
- Power cord
- Set with modular cables:
1x PCIe cable with 1x 6-pin connector
1x PCIe cable with 1x 6+2-pin connector
2x SATA cables with 3x 15-pin connectors each
1x cable with 4x 4-pin peripheral connectors
1x cable with 3x 4-pin peripheral connectors and 1x Floppy connector
- Set with screws
Note:
The pre-installed 120 mm fan is temperature controlled and only starts spinning once a certain temperature limit is breached. As long as this limit is not exceeded (e.g. after installing the PSU), the fan will not begin to cool.
DOWNLOADS
Product pictures (high resolution)