Product archive

WPM power supply series

WPM power supply series
The power supplies of the WPM-series operate at an efficiency of over 80%.
However, the main feature of the WPM power supplies is the cable management system, which allows the user to secure the cables that are needed for the PC components. Not only will this keep the case tidy, but the inside airflow will not be adversely affected by unnecessary dangling cords.
The WPM power supplies are cooled by a quiet 140 mm fan, which operates at a low speed and low volume but produces a high airflow.
To connect several graphic cards, the WPM series power supplies offer a 6 pin and 6+2 pin PCIe connector in each case.
The WPM power supplies are available in 400, 500, and 600 Watt, and are supplied with a comprehensive modular cable set.


  High energy efficiency:
The WPM series achieve an energy efficiency higher than 80%. This value indicates the ratio (in percent) between energy input and output. The closer this value reaches 100%, the less power dissipation the PSU produces.
  Cable management:
The WPM PSUs provide a modular cable system. Thus only the required cables need to be connected.
  Active PFC function:
The WPM series power supplies operate with active power factor correction (PFC).
  140 mm fan:
The installed 140 mm fan provides a considerably higher airflow with lower rpm, thus reducing the operating noise effectively.

  PCIe connectors:
The WPM PSUs are equipped with one 6-pin and one 6+2-pin PCIe connector.
  ErP ready:
Stand-by energy consumption max. 0.3W.

Package contents:
  • Power supply ”WPM400” or ”WPM500” or ”WPM600”
  • Power cord
  • Cable bag
  • Set with modular cables:
    • 1x PCIe cable with 1x 6-pin connector
    • 1x cable with 5x 4-pin peripheral connectors and 1x Floppy connector
    • 2x SATA cables with 3x 15-pin connectors each
  • Set with mounting screws
  • Manual flyer

Data sheet (PDF)
Product pictures (high resolution)
© SHARKOON Technologies