ATX Midi Tower

T9 Value

T9 Value
The housings of the T9 Value series are ATX cases in various colors: Apart from the main board mount, the slot faceplates and the quick locking mechanisms are also colored from the otherwise black interior features. For the lovers of classical style naturally a Value model in black is available.
The chief attraction of the colored versions: The three pre-installed LED fans of the Value edition in the color of interior finish - the black model comes with three non-illuminating fans. With the finishing - and later for the built-in hardware - the side panel contains an effective acrylic window. Two of the pre-installed 120 mm fans are in the front bezel, the third is installed in the backside of the case. Thus they ensure a continuous, refreshing air flow through the center of the computer in which the intensive heat of the components can build. In order to further optimize this air flow, the case has a sophisticated cable management system which permits space saving and orderly relocation of the internal power and data cables. The top of the front bezel contains an easy to reach I/O panel with two USB3.0, two USB2.0 and two audio ports.
The interfaces are framed by blue LEDs for power (both sides) and hard drive activity (only on one side), the color also matches the interior finish.
The T9 Value case offers nine continuous 5.25" drive bays in which the optical drives can be attached through the quick locking mechanisms.
For the installation of 3.5" devices the accessory set offers suitable mounting brackets.

Features
  • ATX case
  • Acrylic side panel
  • 9x 5.25" drive bays
  • Incl. 1x 5.25" mounting frame for 2x 2.5" HDDs/SSDs or 1x 3.5" HDDs
  • Front I/O with 2x USB3.0 (internal 19-pin mainboard connector), 2x USB2.0, 1x headphone and 1x microphone connector
  • 7 slots for add-on cards
  • Mesh front panel with power and reset button
  • Quick fasteners for optical drives, mainboard mounting panel with installation opening for coolers
  • 2 openings for water cooling
  • Cable management system
  • Dimensions: 475x200x440 mm (LxWxH)
  • Weight: 6.6 kg
Fan configuration:

Front panel   2x 120 mm fan with LED as well as 3-pin and 4-pin connector (pre-installed)
Rear panel   1x 120 mm fan with LED as well as 3-pin and 4-pin connector (pre-installed)

Note:
The pre-installed fans of the black Value version are not illuminated!


Compatibility:

Max. length graphics card   30 cm
Max. height CPU cooler   16 cm
Max. length PSU   30 cm

DOWNLOADS
Data sheet (PDF)
DEEN
Manual (PDF)
DEENJP
Product pictures (high resolution)
© SHARKOON Technologies